中国塑料物性表查询网|国内最好的物性表查询网! 财富热线:18681139818   QQ:13931677   Email:tjh@rjplastics.com
北化院PBT
 中国物性表查询网 >> PFA >> PFA 950HP物性表

PFA 950HP物性表

分类: PFA   出处:仁捷塑化  更新时间:2017-06-13   添加到收藏  

 

Teflon® PFA 950HP Plus

全氟烷氧基

 

DuPont Fluoropolymers

产品说明:

For inventory control purposes product name may be followed by an X.

Products labeled PFA 950HP Plus and PFA 950HP Plus X are equivalent and all information in this document is applicable to both.

Typical Application
With an exceptional typical MIT folding endurance of 2,500,000* cycles, DuPont™ Teflon ® PFA 950HP Plus is designed to withstand repeated flexing and the most aggressive chemical stress-cracking agents. Applications for Teflon ® PFA 950HP Plus include fluid handling components for high-performance chemical delivery systems, as well as tubing, unsupported pipe linings for the production of ultra-pure chemicals, and semiconductor components where purity in the parts-per-billion range is critical.

Description
DuPont™ Teflon ® PFA 950HP Plus is a premium fluoroplastic resin available in pellet form. Teflon ® PFA 950HP Plus possesses the same exceptional chemical resistance, high purity, and protection against ionic contamination as Teflon ® PFA HP grades with the added benefits of improved flex life and chemical stress-crack resistance. Teflon ® PFA 950HP Plus meets the increasingly stringent requirements for ultra-reliable and non-contaminating parts, as well as unmatched HCl permeation resistance. The improved flex life and chemical resistance will reduce the cost of ownership of high purity fluid handling systems by reducing downtime caused by mechanical or chemical stresses. Additionally, parts molded with Teflon ® PFA 950HP Plus have improved clarity and a smooth finish, which can further help prevent buildup of microbial contamination in water handling systems. Table 1 shows the typical property data for Teflon ® PFA 950HP Plus.

Teflon ® PFA 950HP Plus is a relatively low melt flow rate (typical MFR of 2), special purpose resin with the lowest level of extractables designed to meet ultra-high purity requirements. The enhanced resistance to environmental stress-cracking makes Teflon ® PFA 950HP Plus a preferred resin when extended service is required in hostile environments involving chemical, thermal, and mechanical stress. Additionally, the enhanced purity of Teflon ® PFA 950HP Plus makes it suitable for applications that require improved color, lower extractable fluorides, and freedom from other foreign materials. This product contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed. Examples are in semiconductor manufacture, fluid handling systems for industry or life sciences, and instrumentation for precise measurements of fluid systems. Teflon ® PFA 950HP Plus combines the processing ease of conventional thermoplastics with the properties similar to those of polytetrafluoroethylene.

With Teflon ® PFA 950HP Plus, components can last longer under dynamic loads and resist damage caused by ozonated fluids and fluorosurfactants. Combined with exceptionalchemical, ermeation, and stress-crack resistance, this durability leads to a reduced cost of ownership. The high purity and fully fluorinated molecule end groups of Teflon ® PFA 950HP Plus can reduce contamination to protect process yields.

Properly processed products made from neat Teflon ® PFA 950HP Plus resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance.

In a flame situation, products of Teflon ® PFA 950HP Plus resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.

Teflon ® PFA 950HP Plus meets the requirements of ASTM D3307, Type V
Teflon® PFA 950HP Plus 物性表
基本信息  
特性
  • 纯度高
  • 低摩擦系数
  • 低吸湿性
  • 低烟度
  • 高 ESCR(抗应力开裂)
  • 良好的电气性能
  • 良好的柔韧性
  • 流动性低
  • 耐化学性良好
  • 耐气候影响性能良好
  • 耐热性,中等
  • 热稳定性,良好
  • 韧性良好
  • 食品接触的合规性
  • 中等透明度
用途
  • 衬里
  • 管道系统
  • 管件
  • 液体处理
机构评级
  • FDA 食品接触, 未评级
形式
  • 粒子
加工方法
  • 吹塑成型
  • 挤出
  • 树脂传递成型
  • 压缩模塑
  • 注射成型
物理性能 额定值 单位制 测试方法
比重 2.14 g/cm³ ASTM D792
熔流率(熔体流动速率) (372°C/5.0 kg) 2.0 g/10 min ASTM D3307, ISO 12086
吸水率 (24 hr) < 0.030 % ASTM D570
硬度 额定值 单位制 测试方法
肖氏硬度 (邵氏 D) 55   ASTM D2240, ISO 868
机械性能 额定值 单位制 测试方法
抗张强度     ASTM D3307, ISO 12086
    23°C 28.0 MPa ASTM D3307, ISO 12086
    200°C 15.0 MPa ASTM D3307, ISO 12086
伸长率     ASTM D3307, ISO 12086
    断裂, 23°C 260 % ASTM D3307, ISO 12086
    断裂, 200°C 450 % ASTM D3307, ISO 12086
弯曲模量     ASTM D790, ISO 178
    23°C 600 MPa ASTM D790, ISO 178
    200°C 50.0 MPa ASTM D790, ISO 178
热性能 额定值 单位制 测试方法
熔融温度 290 °C ASTM D4591
电气性能 额定值 单位制 测试方法
体积电阻率 1.0E+18 ohms·cm ASTM D257, ISO 1325
介电强度      
    0.250 mm 1 80 kV/mm ASTM D149
    0.250 mm 80 kV/mm IEC 60243-1
介电常数 (1 MHz) 2.03   ASTM D150, IEC 60250
耗散因数 (1 MHz) < 2.0E-4   ASTM D150, IEC 60250
可燃性 额定值 单位制 测试方法
UL 阻燃等级 2 V-0   UL 94
极限氧指数 > 95 % ASTM D2863, ISO 4589-2
补充信息 额定值 单位制 测试方法
Critical Shear Rate (372°C) 12.0 sec^-1  
MIT Folding Endurance 3(200.0 µm) 2.5E+6 Cycles ASTM D2176

亲,如果要PDF物性表,可以到物性下载栏目下载,或发邮件到:tjh@rjplastics.com索取!
温馨提示:仁捷公司免费24小时提供塑胶原料注塑成型技术支持,咨询热线:18681139818,联系人:唐生
Tag: PFA ,950HP